Bearing torque, load and life

Home>Bearing knowledge>Motor torque, load and life
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Bearing torque, load and life

Source: China Bearing Network Time: 2018-03-22

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Starting torque
The torque required to rotate a bearing ring or washer relative to the opening of another fixed ferrule or washer.
2. Rotational torque
When a bearing ring or washer rotates; the torque required to block the movement of the other ring or washer.
3. Radial load
The effect is the load in the direction of the axial direction of the straight bearing.
4. Axial load
The effect is the load in the direction of the axis of the parallel bearing shaft.
5. Static load
When the relative rotational speed of the bearing ring or washer is zero (central or thrust bearing) or when the rolling element does not move in the direction of rolling (linear bearing); the effect on the bearing.
6. Dynamic load
When the bearing ring or washer is relatively rotated (central or thrust bearing) or when the tumble element is moving in the direction of rolling (linear bearing); the effect on the bearing.
7. Equivalent load
The general term used to account for theoretical loads; in certain situations; the bearing appears to bear the practical load under the theoretical loading effect.
8. Radial (axial) fundamental static static (axial) load rating
Radial static load (intermediate axial static load) corresponding to the total eternal deformation of the roll and raceway. If under zero load; roller and raceway (roller bearing) are or assumed to be normal busbars (full line When touched; under the maximum touch stress; the total eternal deformation occurring at the roll and raceway touch is 0. 0001 times the diameter of the roll body. For single row angular touch bearings; the radial extra load is such that the bearing rings are opposite each other. The radial weight of the load with pure radial displacement.
9. Radial (axial) fundamental dynamic load (axial) load rating
Stable radial load (stable intermediate axial load); under this load; the rolling bearing can theoretically saturate the fundamental extra life of 1 million rpm. For single-row angular touch bearings; the radial additional load is the resulting bearing sleeve The weight of the load relative to each other with a pure radial displacement.
10. Life (refers to a set of bearings) life
The number of revolutions of a ferrule or a washer or a tumbling element of the bearing is initially shown before the fatigue is enlarged; the number of revolutions of one ferrule or one washer relative to the other ferrule or a washer. The life is also available at a given steady speed. Working hours to indicate.
11. Reliability (referring to bearing life) reliability
A group of nearly identical rolling bearings operating under the same conditions. The percentage of bearings that wish to reach or exceed a certain number of lifespans. The reliability of a set of bearings is the probability that the bearing will reach or exceed the ruled life.
12. Extra life rating life
The guess value of the lifespan based on the radial fundamental extra dynamic load or the axial fundamental extra dynamic load.
13. Basic extra life
Additional lifespan associated with 90% reliability.
14. Life factor
In order to obtain a fundamental additional radial dynamic load or a fundamental additional axial dynamic load corresponding to a given extra life; a correction factor applicable to the equivalent dynamic load.
15. Bearing block plummer block
A combination of a radial bearing and a seat; a support plate on the support surface parallel to the bearing axis.
16. Vertical block plummer block housing
Mount the bearing for the rolling bearing.
17. Flanged housing
a seat having a radial flange and a screw hole for the device on the outer surface of the support shaft.
18. Adapter sleeve
An axially open sleeve having a cylindrical bore; the outer surface is conical and has a small end with an external thread. For use with a tapered bore bearing assembly (with lock nut and lock washer) On the axis of the appearance.
19. Withdrawal sleeve withdrawal sleeve
a sleeve having a cylindrical inner bore axially open; the outer outer surface is conical and the outer end is externally threaded. For mounting the tapered bearing on the shaft of the outer cylindrical outer surface (with a nut).
20. Lock nut locknut
Screw nut with cylindrical outer surface and axial groove; lock the nut with an outer claw of the lock washer and the annular wrench. It is used for axial positioning of the rolling bearing.
twenty one. Lock washer lockwasher
A thin steel plate washer with many external claws. One outer claw is used to lock the nut; one inner claw is inserted into the axial groove of the adapter sleeve or shaft.
twenty two. Eccentric locking collar
a grooved steel ring having a pain in the inner hole at one end; the device is in the flat end of the inner spherical bearing with a flat and painful extension end. The inner ring is rotated relative to the inner ring to fix the inner ring; then the top wire is fastened to fix it Tight on the shaft.
twenty three. Concentric sleeve
The rim is mounted on the wide inner ring of the outer spherical bearing; the top wire is screwed into the hole in the inner ring and touched with the shaft.

Recommend to friends comments close window

Bearing related knowledge
NSK Rolling Bearings Determination of Bearing Steel Pipe Replacement Motor Bearings Practical Skills Analysis of the Frequently Damaged Universal Joint Bearings Which Ways to Improve the Cooperation Accuracy of INA Bearing Devices


This article links to http://
Please indicate the bearing network http://

Previous:Classification of bearings according to the size of the outer diameter of the bearing Next:How to repair the cross shaft

Light Powder-actuated Fastening Tool is low velocity powder actuated, single shot, .22 caliber tool which is designed for light base  and concrete not harder than C40. 

FEATURES & APPLICATIONS



Features
  • One tool for a wide range of applications
  • Compact, sleek design – allows access to narrow spaces
  • Easy to use and maintain – minimizing errors and tool downtime
  • Consistent energy output over entire lifetime – delivering more reliable fastening quality
  • Maximum nail length 62 mm, or 72 mm for wood-to-concrete applications


Applications
  • Fastening formwork or formboard to concrete
  • Fastening sill plates or trusses to concrete
  • Ease to use and maintain – minimizing errors and tool downtime
  • Fastening wall-ties to concrete or steel
  • Fastening wire mesh (chicken mesh) to concrete
  • A wide variety of applications using collated fastener
  • Fastening wood and metal sheet to concrete, sand-lime block masonry or steel
  • Fastening 2x4s to concrete
  • Attaching drainage foils and membranes to concrete or CMU block
  • Fastening perimeter wall, deflection or slip clips to concrete and steel






Light Powder-actuated Fastening Tool

YIBIN CITY NANXI DISTRICT QIANGXIN PLASTIC CO.,LTD. , https://www.homsetfastening.com