Chromium Overlay Wear Plate for Impact Walls

Model NO.: 1500X3000
Special Use: Wear Resistant Steel
Stock: Stock
Name: Chromium Overlay Wear Plate
Hardness: Around Hv600
Tolerance: +/- 1 mm
Heat Resistance: 400 Degree
Cutting: Plasma/Laser Cutting/Water Jet Knife
Cold Forming: Min. Radius 150mm(6+4)
Trademark: HYSTER, OEM, CQMS, DOMITE
Transport Package: Polywood Pallet
Specification: TOP GRADE
Origin: Changsha, Hunan, Cn
HS Code: 72259990
Model NO.: 1500X3000
Special Use: Wear Resistant Steel
Stock: Stock
Name: Chromium Overlay Wear Plate
Hardness: Around Hv600
Tolerance: +/- 1 mm
Heat Resistance: 400 Degree
Cutting: Plasma/Laser Cutting/Water Jet Knife
Cold Forming: Min. Radius 150mm(6+4)
Trademark: HYSTER, OEM, CQMS, DOMITE
Transport Package: Polywood Pallet
Specification: TOP GRADE
Origin: Changsha, Hunan, Cn
HS Code: 72259990
CHROMIUM OVERLAY WEAR PLATE FOR IMPACT WALLS

HYSTER PROVIDE OEM PRODUCTION ACCORDING TO YOUR DIMENSION & MATERIAL !
most of our customer are from Germany, American, Australia, Spain, as well as South  Africa. welcome to choose us - the most experienced manufacturer and exporter for laminite wear plates, domite chocky bars, chromium carbide wear blocks, grinder hammer tips, white iron wear bars as well as Cr-c overlay wear plate.
Chromium Overlay Wear Plate for Impact Walls


OVERLAY-PLATE is welded by chromium carbide overlay on a mild steel backing plate. Manufactured by our own design's welding machine with exclusive technique. OVERLAY-PLATE has excellent performance in abrasion resistant.
                                                                                          
CHEMICAL COMPOSITION   C 4.0%~5.5%    Cr 21%~27%
                                                                                         
BACKING PLATE Standard: SS400 mild steel or equivalent Stainless or others upon request
                                                                                        
HARDNESS        HV600±
                                                                                                                                                                                   
TOLERANCES      ± 1mm
                                                                                        
HEAT RESISTANCE Maximum: 400 degree
                                                                                        
MICROSTRUCTURE Mixture of high volume hexgonal shaped chromium carbide
in tough austenitic and martensitic matrix(GRADE 2355)
                                                                                         
PENETRATION TO THE BASE METAL   1.5mm
                                                                                           
COLD FORMING   Minimum Radius: 150mm( for 6+4 )
Suggested: using hydrolic press to bend plate
                                                                                           
CUTTING          Plasma( from backing plate side ) / Laser Cutting / Water Jet Knife
Chromium Overlay Wear Plate for Impact Walls                                                                                           
APPLICATIONS   -ASH LINES                            -BLAST FURNACE BELL & BURDEN
                           -ELBOW                                 -SINTER PLANT
                          -BUCKET & LIPS                      -DRAG LINES
                          -CHUTE & HOPPER LINERS     -DUCT
                          -CLASSIFIER                            -FAN BLADES & HOUSINGS
                          -MINE CAR LINERS                  -CYCLONES
                         -ORE CHUTES                          -DISCHARGE FUNNELS
                        -SLAG CHUTES                         -DREDGE PUMP SIDE PLATES
                        -EXTENSION RING                     -CEMENT KILNS
                        -VIBRATOR PAN FEEDEER LINER   -GRIZZLY BARS
                       -SINTER BREAKER BAR               -CONVEYOR CASINGS
                       -GREEN WALT CRUSHERS           -STEEL PLANT
Unit **mm

Standard Overlays

Weight per sq/m

Standard Sheet Size

Overall Thickness

4 ON 4

62

1500x3000 / 1200x2400

8

4 ON 6

77

1500x3000 / 1200x2400

10

6 ON 6

92

1500x3000 / 1200x2400

12

5 ON 8

100

1500x3000 / 1200x2400

13

6 ON 8

108

1500x3000 / 1200x2400

14

5 ON 10

116

1500x3000 / 1200x2400

15

9 ON 10

146

1500x3000 / 1200x2400

19

10 ON 10

157

1500x3000 / 1200x2400

20

12 ON 12

162

1500x3000 / 1200x2400

24

17 ON 12

222

1500x3000 / 1200x2400

29

Chromium Overlay Wear Plate for Impact Walls  


The most common types are:
> Chocky bars                                > Standard wear bars
> Wafer strips                                 > Wear buttons& donuts
> Shredder hammer tips              > Wear plates
> Knife edges                                 > Skid bars/skid blocks
> Shaped wear bars                     > Rockbox Liners
> Micro-ledges                               > Other sizes and shapes CHROMIUM OVERLAY WEAR PLATE FOR IMPACT WALLS

HYSTER PROVIDE OEM PRODUCTION ACCORDING TO YOUR DIMENSION & MATERIAL !
most of our customer are from Germany, American, Australia, Spain, as well as South  Africa. welcome to choose us - the most experienced manufacturer and exporter for laminite wear plates, domite chocky bars, chromium carbide wear blocks, grinder hammer tips, white iron wear bars as well as Cr-c overlay wear plate.
Chromium Overlay Wear Plate for Impact Walls


OVERLAY-PLATE is welded by chromium carbide overlay on a mild steel backing plate. Manufactured by our own design's welding machine with exclusive technique. OVERLAY-PLATE has excellent performance in abrasion resistant.
                                                                                          
CHEMICAL COMPOSITION   C 4.0%~5.5%    Cr 21%~27%
                                                                                         
BACKING PLATE Standard: SS400 mild steel or equivalent Stainless or others upon request
                                                                                        
HARDNESS        HV600±
                                                                                                                                                                                   
TOLERANCES      ± 1mm
                                                                                        
HEAT RESISTANCE Maximum: 400 degree
                                                                                        
MICROSTRUCTURE Mixture of high volume hexgonal shaped chromium carbide
in tough austenitic and martensitic matrix(GRADE 2355)
                                                                                         
PENETRATION TO THE BASE METAL   1.5mm
                                                                                           
COLD FORMING   Minimum Radius: 150mm( for 6+4 )
Suggested: using hydrolic press to bend plate
                                                                                           
CUTTING          Plasma( from backing plate side ) / Laser Cutting / Water Jet Knife
Chromium Overlay Wear Plate for Impact Walls                                                                                           
APPLICATIONS   -ASH LINES                            -BLAST FURNACE BELL & BURDEN
                           -ELBOW                                 -SINTER PLANT
                          -BUCKET & LIPS                      -DRAG LINES
                          -CHUTE & HOPPER LINERS     -DUCT
                          -CLASSIFIER                            -FAN BLADES & HOUSINGS
                          -MINE CAR LINERS                  -CYCLONES
                         -ORE CHUTES                          -DISCHARGE FUNNELS
                        -SLAG CHUTES                         -DREDGE PUMP SIDE PLATES
                        -EXTENSION RING                     -CEMENT KILNS
                        -VIBRATOR PAN FEEDEER LINER   -GRIZZLY BARS
                       -SINTER BREAKER BAR               -CONVEYOR CASINGS
                       -GREEN WALT CRUSHERS           -STEEL PLANT
Unit **mm

Standard Overlays

Weight per sq/m

Standard Sheet Size

Overall Thickness

4 ON 4

62

1500x3000 / 1200x2400

8

4 ON 6

77

1500x3000 / 1200x2400

10

6 ON 6

92

1500x3000 / 1200x2400

12

5 ON 8

100

1500x3000 / 1200x2400

13

6 ON 8

108

1500x3000 / 1200x2400

14

5 ON 10

116

1500x3000 / 1200x2400

15

9 ON 10

146

1500x3000 / 1200x2400

19

10 ON 10

157

1500x3000 / 1200x2400

20

12 ON 12

162

1500x3000 / 1200x2400

24

17 ON 12

222

1500x3000 / 1200x2400

29

Chromium Overlay Wear Plate for Impact Walls  


The most common types are:
> Chocky bars                                > Standard wear bars
> Wafer strips                                 > Wear buttons& donuts
> Shredder hammer tips              > Wear plates
> Knife edges                                 > Skid bars/skid blocks
> Shaped wear bars                     > Rockbox Liners
> Micro-ledges                               > Other sizes and shapes

Pneumatic Telescopic Mast

Pneumatic telescopic mast with power of air source, promote the movement of multicylinder through air compression to lift the mast. Pneumatic telescopic mast industry has experienced a rapid development recently. This mast has been widely used in various fields such as illumination, communication, disaster relief and etc. Due to the features of light loading, general structures, normal maintenance, high security, extreme weather, pneumatic masts have been recognized gradually.


Pneumatic Telescopic Mast

Pneumatic Telescopic Mast,Tower Pneumatic Telescopic Mast,Aluminum Pneumatic Telescopic Mast,Vehicle Mounted Pneumatic Telescopic Mast

Yixing Steel Pole International Trading Co., Ltd , http://www.yx-steelpole.com